» » How Flash Lenovo A6000

How Flash Lenovo A6000


How Flash Lenovo A6000 : Most Android users certainly are not familiar with the term Flashing. Flashing is one of the most powerful and easy method to overcome phones Lenovo A6000 bootloop or brick. Bootloop problems and Birck on Lenovo A6000 Android sytem usually occurs because of damage caused due to various reasons one mistake when melakuakan process Root Lenovo A6000. Lenovo A6000 mobile phone so we just stuck on the logo or always go into recovery mode, can not be lit with a normal.

At this time Android Zone will share the way Flash Lenovo A6000 most convenient to you. Basically the way flash bootloop Lenovo A6000 is a method to reinstall or restore the entire system and the default application found on Lenovo A6000 smartphone us.

Lenovo A6000 in the flash process we use various tools such as QPST / QFIL, USB drivers and firmware Lenovo Lenovo A6000 should be in accordance with your Lenovo mobile phone models. For more details please refer to the steps below Flash Lenovo A6000.

Materials For Lenovo A6000 Flashing :
How Flash Lenovo A6000 bootloop :
  • Download all the ingredients for Lenovo A6000 flashing, then extract. 
  • If you've installed the Lenovo USB Driver and QPST on your PC / Laptop. 
  • Turn off your Lenovo A6000, and wait a few seconds until the phone right -Right dead. 
  • Furthermore, Lenovo A6000 connect to a PC / laptop using a USB cable while pressing the Volume Up button. 
  • Run QFIL who previously have installed on your PC / Laptop. 
  • After QFIL open Lenovo A6000 sure your phone is connected perfectly with out writing Qualcomm HS-USB QDLoader 9008 on QFIL tools. 
  • Then click Browse and locate the file prog_emmc_firehose_8916.mbn inside the extracted folder Fimware Lenovo A6000, and then click Open.
  • After that will appear as shown below, now click Load XML and will appear rawprogram_unsparse click Open on the file and the file will reappear again patch0.xml click Open.
  • If you have click the Download button on QFIL tools and the flashing process will run Lenovo A6000 wait for it to finish.
  • If the Lenovo A6000 flash process is complete, your phone will boot automatically.
Thus tutorial on Lenovo A6000 Flashing bootloop of us, I hope this tutorial useful for you. Thank you for visiting Android Zone.

1 Response to "How Flash Lenovo A6000"

Subscribe to: Post Comments (Atom)