How To Flash Samsung Galaxy Ace S5830 With Odin

How To Flash Samsung Galaxy Ace S5830 With Odin

How To Flash Samsung Galaxy Ace S5830 With Odin - On this occasion Android Zone will give a tutorial How To Flash Samsung Galaxy Ace S5830 With Odin.

Here is a tutorial on how to flash the Samsung Galaxy Ace S5830 With Odin, the flashing process is certainly aiming to repair damage to mobile phone software that experienced such a blank cell phone damage, error menu, there is no writing on the menu, your phone is locked, ask for the security code, etc.

Before performing the flash process you must prepare da and download some materials such as Software and Firmware to process Flashing.

Materials To Flash Samsung Galaxy Ace S5830 :

• Download - Firmware Samsung Galaxy Ace S5830 
• Download - OPS Samsung 5830_Cooper_v1.0  
• Download - Odin Multi Downloader v4.43  
• Download - Driver samsung

How Flash Samsung Galaxy Ace S5830 : 

1. Open Odin Multi Downloader v4.43 that you have downloaded.
2. Install the drivers on your computer.
3. Set your phone to turn off the phone and Entrance way to "download mode" by pressing the Volume Down + Home + Power simultaneously, wait until you see Downloading ...
   
4. Open ODIN and Connect your Samsung Galaxy Ace S5830 to the computer uses the data cable, If you posel been detected by Odin, yellow sign posts port
5. Select "OPS" button and load file s5830_Cooper_v1.0
6. Exstrak Firmware Samsung Galaxy Ace S5830 that you have downloaded, select "Box one package" option on the left side and a button on the 'one package' and enter the file firmeware Samsung Galaxy Ace S5830 that has been extracted.
7. Check again whether all files are in place, Once everything is ready, click on Start and wait for the flashing process is complete Samsung Galaxy Ace S5830.
8. If the flash process is completed there will be writing PASS blue box top left corner and now the Samsung Galaxy Ace S5830 you are ready to use.
   

log the results of full flash Samsung Galaxy Ace S5830 With Odin

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download.. 
<1> 1/9 Finished.
<1> qcsbl download.. 
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer ->> SELESAI

That is all the way How Easy Flash Xiaomi Redmi Note 3 To Rom Official hopefully this tutorial can be useful to you and thank you for visiting. Do not forget to bookmark this website and wait for the latest update of Android Zone. see you later