How to Flash Asus Zenfone 6 With ADB Sideload

Android Zone : For those of you who have constraints on Asus Zenfone 6 yours as bootloop (can not enter the menu), often hang or might want to upgrade or downgrade the firmware or operating system, then you should do a firmware flashing. In this article will be taught how to flashing (installation) firmware or operating system Android on phones Asus Zenfone 6. To do this tutorial you need a computer or laptop.

Software needed:

• Intel USB Driver for Android. Can donwload HERE
• ADB Fastboot tool (Platform-tools). Can be found HERE > click the link ADB FastBoot Tool
• Firmware Android Zenfone 6. Download HERE > Select OS: Android > Click Firmware

Steps flashing Asus Zenfone 6:

• Install Intel USB Driver (if you had already been installed no need to reinstall)
• Download and extract the ADB Fastboot tool, 
• After the download at the link above, you will get a file platform-tools.zip > extract the file using the application 7-Zip, WinZip, etc.> You will get a platform-tools folder 
• Download and extract the firmware Zenfone 6.
• Zenfone 6 Firmware .ZIP file form and in it there .ZIP file again. You must extract the firmware ZF6 just once, so that the extracted file will remain in the form of a .zip. Put the extract in the platform-tools folder (ADB).

Note: Some firmware does not need to be extracted again. If in the ZIP file is a file boot.img, recovery.img, etc., it is not necessary in the extract

• Log into Recovery mode Asus Zenfone 6
• Turn off the phone and then wait about 20 seconds
• After hp completely off, press the POWER button + Volume Up simultaneously
• You will enter into Fastboot mode Mode> use the volume key point to writing down and press the power button recovery
• The phone will restart after the Android image will appear supine> press the Volume down button and press the Volume Up button (Volume down remain on hold), then remove the Volume Up (Volume Down still on hold). The sequence: Vol Down> Down Vol + Vol Up> Vol Down
• You will go into recovery mode Asus Zenfone> by using the Volume buttons to navigate and the Power button to select: select Wipe Data> wait until the process is complete, then select Wipe Cache and wait for it to finish. Recently select Apply update from ADB 
• Asus Zenfone 6 connect to a computer using a data cable.
• Upload firmware to the phone.
• Open the platform-tools folder on the computer and activate the Command Prompt by: Press the left Shift on the keyboard and mouse while detained right click> select Open Command Window Here.
• When the command prompt (cmd) is already open, type adb devices> If the phone has successfully connected it will display information ZF6 yours on the computer screen.
• Type again in cmd: adb sideload (name of the firmware file that was downloaded). Example: adb sideload UL-ASUS_T00G-WW-1.18.40.12-user.zip

Note: The file name must be written exactly, both lowercase and the magnitude and punctuation must match exactly

Then if the hassles of writing a long file name, the firmware file can be renamed or replaced in name only. For example renamed so: update.zip. I'll just type: adb sideload update.zip

• Wait until the process is complete> if it has stopped, select Wipe Data and Cache Wipe sekalu again and click reboot system now to enter the menu. Note: The first time the boot process will usually take a little longer, it is normal.

That is all the way How to Flash Asus Zenfone 6 With ADB Sideload,hopefully this tutorial can be useful to you and thank you for visiting. Do not forget to bookmark this website and wait for the latest update of Android Zone. see you later.